Q.: For software to be reliable it must:
A. Be easy to maintain.
B. Be unlikely to cause a failure.
C. Never fail under any circumstances.
D. Be written according to coding standards
B is correct
<<<<<< =================== >>>>>>
Q.: Which test design techniques should a tester use to respectively achieve the following: (a) Check the documented features of the system,
(b) ensure 100 % decision c overage, and
(c) detect likely defects and distribution?
A. Specification-based, data driven testing, and defect density techniques
B. Specification-based, branch coverage, and exploratory techniques
C. Structure-based, equivalence partitioning, and exploratory techniques
D. Specification-based, structure-based, and experience-based techniques
D is correct
<<<<<< =================== >>>>>>
Q.: Faults found by users are due to:
A. Poor quality software
B. Poor software and poor testing
C. Bad luck
D. Insufficient time for testing
B is correct
<<<<<< =================== >>>>>>
Q.: An incident logging system
A. Only records defects
B. Is of limited value
C. Is a valuable source of project information during testing if it contains all incidents
D. Should be used only by the test team.
C is correct
<<<<<< =================== >>>>>>
Q.: The later in the development life cycle a fault is discovered, the more expensive it is to fix. Why?
A. The documentation is poor, so it takes longer to find out what the software is doing.
B. Wages are rising
C. The fault has been built into more documentation,code,tests, etc
D. None of the above
C is correct
<<<<<< =================== >>>>>>
Q.: Which set of test data demonstrates equivalence partitioning to check whether a customer is a teenager or not?
A. 10, 15 and 19 years
B. 13, 19 and 25 years
C. 13, 16 and 19 years
D. 12, 13 and 20 years
D is correct
<<<<<< =================== >>>>>>
Q.: Which technique if OFTEN considered as an extension of equivalence partitioning?
A. Decision table testing
B. State transition testing
C. Use case testing
D. Boundary value analysis
D is correct
<<<<<< =================== >>>>>>
Q.: Software testing activities should start
A. As soon as the code is written
B. During the design stage
C. When the requirements have been formally documented
D. As soon as possible in the development life cycle
D is correct
<<<<<< =================== >>>>>>
Q.: A company by the name Software Testing Genius Inc. decides to use functional test execution automation tool for testing GUI of their product. The GUI is expected to change frequently. Software Testing Genius Inc. has put some of the manual testers through a 3-day training program on how to use the tool. Which of the following is likely to be true?
A. Automation is likely to fail because of frequent changes and lack of experience
B. Automation is likely to fail because of GUI automation is not the right way to automate
C. Automation is likely to succeed because automation is very useful for frequent changes
D. Automation is likely to succeed because the team has been trained on tool.
A is correct
<<<<<< =================== >>>>>>
Q.: A test design technique is
A. A process for selecting test cases
B. A process for determining expected outputs
C. A way to measure the quality of software
D. A way to measure in a test plan what has to be done
A is correct
<<<<<< =================== >>>>>>
Q.: What should be the MAIN objective during development testing?
A. To cause as many failures as possible so that defects in the software are identified and can be fixed.
B. To confirm that the system works as expected and that requirements have been met
C. To assess the quality of the software with no intention of fixing defects
D. To give information to stakeholders of the risk of releasing the system at a given time
A is correct
<<<<<< =================== >>>>>>
Q.: Which one of the following BEST describes a test control action?
A. Setting a completion date
B. Reporting on poor progress
C. Adding extra test scripts to a test suite
D. Retesting a defect fixC is correct
<<<<<< =================== >>>>>>
Q.: To test an input field that accepts a two - digit day based on a particular month which data set demonstrates boundary value analysis?
A. 0, 1, 16, 31 and 100
B. 1, 27, 28, 30 and 31
C. 2, 26, 27, 29 and 30
D. -1, 0, 15, 32 and 99
B is correct
<<<<<< =================== >>>>>>
Q.: Which two of the following are attributes of structural testing?
a. It is based on testing features described in a functional specification.
b. It can include statement and decision testing.
c. It can be carried out at all levels of testing.
d. It can include debugging.
A. a and b
B. a and d
C. b and d
D. b and c
D is correct
<<<<<< =================== >>>>>>
Q.: Which one of the following BEST describes the purpose of a priority rating in an incident report?
A. To show which parts of the system are affected by the incident
B. To show how quickly the problem should be fixed
C. To show how much it would cost to fix the defect
D. To show progress of testing
B is correct
<<<<<< =================== >>>>>>
Q.: Which acceptance test is USUALLY performed by system administrators?A. Operational
B. Customer
C. Contractual
D. Regulatory
A is correct
<<<<<< =================== >>>>>>
Q.: Which of the following is MOST clearly a characteristic of structure based (white-box) techniques?
A. Test cases are independent of each other
B. Test cases can be easily automated
C. Test cases are derived systematically from the delivered code
D. Test cases are derived systematically from specifications
C is correct
<<<<<< =================== >>>>>>
Q.: Which of the following is a MAJOR activity of test planning?
A. Initiation of corrective actions
B. Measuring and analysing results
C. Determining the exit criteria
D. Monitoring and documenting progress
C is correct
<<<<<< =================== >>>>>>
Q.: Retirement of software or a system would trigger which type of testing?
A. Load testing
B. Portability testing
C. Maintenance testing
D. Maintainability testing
C is correct
<<<<<< =================== >>>>>>
Q.: Which of the following statements about black box and white box techniques is correct?
A. Decision Testing, Equivalence Partitioning and Condition Coverage are all black box techniques
B. Decision Table Testing, State Transition and Use Case Testing are all black box techniques
C. Decision Testing, Equivalence Partitioning and Statement Testing are all white box techniques
D. Boundary Value Analysis, State Transition and Statement Testing are all white box techniquesB is correct
<<<<<< =================== >>>>>>
No comments:
Post a Comment